2020-07-02
For spray molding, it is the electrostatic powder spraying that we often talk about. It uses an electrostatic generator to make the plastic powder charged and adsorbed on the surface of the iron plate, and then passes through the baking from 180 degrees Celsius to 220 degrees Celsius. , The end causes the powder to melt and adhere to the metal surface. Generally speaking, spray plastic products are mostly used in cabinets for indoor use, and the paint film shows a flat or matte effect. So what are the advantages of electrostatic spraying (electrostatic spray)?
First of all, it does not need thinner, it will not cause pollution to the environment during the construction process, and it is also non-toxic and harmless to the human body; the appearance quality of the coating is excellent, the adhesion and mechanical strength are strong; the curing time of spraying construction is short ; The corrosion resistance and wear resistance of the coating is much higher; no primer is required; the construction is also very simple and the technical requirements for the workers are not very high; and the cost is still lower than the spray painting process; some construction occasions have clearly stated that they must Use electrostatic spraying process; the flow phenomenon common in paint spraying process will not occur during electrostatic powder spraying process.
The above is what Kangzhong Electromechanical Co., Ltd. brings to you this time, and our company is a Ningbo Beilun electrostatic spray paint processing company. At the same time, our company is also a rare large-scale spray hardware processing factory in Beilun. The company also handles Ningbo deplasticizing and depainting processing, Ningbo electrostatic spraying processing, Ningbo Beilun spraying processing, Ningbo Beilun electrostatic spraying processing, Ningbo electrostatic spraying, Ningbo spray painting processing, etc. Welcome everyone!
|
浙公網(wǎng)安備33020602000705號
浙公網(wǎng)安備33020602000705號
